- Late 2010 macbook pro 13 what hard rive replacement mac os x#
- Late 2010 macbook pro 13 what hard rive replacement mac os#
- Late 2010 macbook pro 13 what hard rive replacement install#
Late 2010 macbook pro 13 what hard rive replacement install#
Lion 10.7.5 will be downloaded from the internet and when the download finish the system will restart and the actual install will begin.
Late 2010 macbook pro 13 what hard rive replacement mac os#
Once that is completed exit disk utility and you can then either restore from your time machine backup (Have that drive connected to the system before you start this process) or you can then select "Reinstall Mac OS X" to reinstall Lion OS X clean and fresh if you like.
Late 2010 macbook pro 13 what hard rive replacement mac os x#
Once the Mac OS X Utilities loads use disk utility to partition the new drive as one partition, formatted "Mac OS Extended (Journaled)" with a partition table of GUID, click the Options button for that, and name the partition Macintosh HD. This type of rubber grommet is ONLY for use embedded in the top case. The orange & black rubber hard drive grommets hold the hard drive in place and reduces vibration and noise. That will boot the system from the Apple servers from over the internet so it is best to have the system wired to your internet router, Ethernet cable from computer to router. Replacement rubber hard drive mount pads (2 ct.) for MacBook Pro 13 Unibody A1278 (Mid 2009-Mid 2012), MacBook Pro 15 A1286 (Mid 2009-Mid 2012), and MacBook Pro 17 A1297 (Mid 2010-Late 2011). Sorry I mis read your topic title and the body of your post.Īt startup hold down the Command + Option/Alt + r key until you see a globe on the screen. Were you running 10.6.8 or 10.7 or other when it stopped working? I had to start with a "full retail" 10.6.3, Install on another appropriate Mac, update to 10.6.8, then clone to the MacBook Pro. Release Discs for a different model Mac will NOT work, because they only have the Drivers for that model. The table show that your Mac shipped with 10.7.2 but i have affirmed (from other sources) that it is mainly a "speed bump" of the early 2011 version, and could run 10.6.7 if there were such an Installer DVD. I own both the early and late 2011 15" MacBook Pro.īOTH these Macs can RUN 10.6.8. If anyone else has had similar problems then I would love to hear from you. Tried to boot without the disc - Folder logo with a question mark in the middle flashes on screen, which I would imagine means no hard drive installed. Pressed the C button to boot from DVD - Again, no response.ģ.
Holding down the Option Key to go into Startup Manager - After selecting the OS disc (with no hard drive listed alongside) nothing happens.Ģ. On startup (with the OS X install disc inside the drive), the normal boot up chime sounds along with the Apple logo on screen, however, nothing else happens.ġ. I've fitted the new hard drive and sure enough the SATA connector attached fine, now the problem arises when I turn on my computer. I bought a 1TB Western Digital WD10JPVX which comes with SATA-III, which I was led to believe my computer could handle after reading the numerous threads on here confirming so. My standard 750GB Hitachi Hard Drive failed on me last week and after speaking to AppleCare who told me that my laptop was out of warranty, I decided to try and fix the problem myself as I have a few friends that have had the same issue in the past and have switched the hard drives themselves.
0 kommentar(er)
